Geekvape Aegis Legend 3 200W Starter Kit

The Geekvape Aegis Legend 3 Kit combines a 200W dual-battery mod with the 5.5mL Z Fli sub-ohm tank. It is built for experienced adult users who want adjustable high-output performance, replaceable batteries and a broad Geekvape Z Series coil platform.

The AS Chip 4.0 supports Power, TCR, Eco, Smart, Boosting and Memory modes. Memory Mode stores up to five preferred settings, while the 0.96-inch TFT color screen presents operating information in a clear interface. Three lock settings allow the device to use touch detection, button-only firing or fully unlocked controls.

The included Z Fli Tank uses a flip-top filling cap, adjustable top airflow and press-fit Z Series coils. The standard kit contains a pre-installed 0.15Ω Z0.15 XM coil and a spare 0.4Ω Z0.4 XM coil. Two matched 18650 batteries and e-liquid are required and sold separately.

Key Features

• Adjustable 5-200W output
• AS Chip 4.0 with stable buck-boost output architecture
• Power, TCR, Eco, Smart, Boosting and Memory modes
• Memory Mode stores up to five settings
• 96″ TFT color screen
• Touch Lock, Button Lock and Unlock settings
• Dual external 18650 battery configuration
• IP68-rated water and dust resistance
• Shock-resistant Aegis chassis construction
• 5mL Geekvape Z Fli Tank
• Flip-top fill cap and adjustable top airflow
• Geekvape Z Series coil compatibility
• USB Type-C charging connection
• Batteries and e-liquid sold separately

Z Fli Tank and Coil Platform

The Z Fli Tank is designed around a top-airflow path and a hinged filling cap that remains attached while the tank is open. Its press-fit coil chamber accepts Geekvape Z Series coils.

The 0.15Ω XM coil is marked for 70-85W, while the 0.4Ω XM coil is marked for 50-60W. Begin within the range printed on the installed coil and adjust gradually rather than assuming one setting suits every coil and e-liquid.

Colour Options

• Titanium Gray
• Green
• Purple
• Red
• Blue
• Black
• Golden Blue
• Silver
• Rainbow
• Dark Gray

Package Contents

• 1 × Geekvape Aegis Legend 3 Mod
• 1 × Geekvape Z Fli Tank (5.5mL standard configuration)
• 1 × Geekvape Z0.15 XM Coil, 0.15Ω, 70-85W (pre-installed)
• 1 × Geekvape Z0.4 XM Coil, 0.4Ω, 50-60W (spare)
• 1 × Spare Glass Tube (5.5mL)
• 1 × Spare Parts Pack
• 1 × USB Type-C Cable
• 1 × User Manual